EACO CHEM C-TAR MELT 1 GAL

C-Tar Melt is a blend of water soluble, easily rinseable,
non hazardous ingredients. C-Tar Melt is safe for wood,
metal, and masonry surfaces and will not raise the grain or
cause discoloration of the surface. The product will aid in
the separation of tar residue from rinse water if runoff is
contained and stored for a short period of time.

Dilution
Use undiluted (straight).
Application Instructions
C-Tar Melt is used straight; do not dilute this product with
water. The best method of tar removal from a painted vehicle is
by putting a small amount on a cloth and wiping.
For porous masonry, spray-on two applications, one following the other after a 5 minute soak period will sometimes out
perform a single application and mechanical removal. Dwell
times will vary with thickness of the coating to be stripped.
C-Tar Melt can remove many materials in a fifteen minute time
span. Heavy layers may be removed with an overnight soak.
Craftsmanship determines the appropriate pressures for rinsing.
A thorough rinse job is always recommended, however, our
chemistry never requires flooding a wall. Pressures that mark
or damage the surface should be avoided. When in doubt, follow the manufacturers recommended P.S.I. for the substrate on
which you are working. Proper ventilation should always be a
consideration when long term exposure will occur. It is recommended that skin contact be kept to a minimum and at least a
water rinse be used after contac